In this video, we show you how to change the Spark Plug on a Husqvarna K760.

Health & Safety Warning - Please ensure that you have safely prepared the machine and workspace. If you are unsure about any aspect of the task please seek professional advice.

Transcript

Today, we're going to change the spark plug on a Husqvarna K760 Disc Cutter. Changing the spark plug is often done a part of servicing the machine. Whilst the cover is off, check your air filter and gauze filter. Remove the air filter cover by removing the three screws with a torx spanner. Then there are two torx screws to be undone to release the air filter. You can then remove the air filter gauze behind it. Using the torx spanner to help you, remove the cap on the spark plug. Then, loosen the spark plug with a 19mm hex socket spanner. Once loosened, unscrew the spark plug by hand. Then simply replace your old spark plug with a new Champion RCJ6Y or NGK BPMR7A. Use the 19mm hex socket spanner to ensure it's tight. Put the cap back on and push down into place. Then replace your new gauze filter into position as shown. Place your new air filter into the air filter base. Make sure the plastic Husqvarna logo on the filter is orientated as shown. Tighten the screws with a torx spanner and check the seal is in tact. Place the casing back over the filter and tighten. Be careful not to tighten too much into the plastic. That's how you change the spark plug on a Husqvarna K760 Disc Cutter.

Parts

Parts and tools included in the K760 how-to video.

• Genuine NGK BPMR7A - BPMR7A
• Champion RCJ7Y Spark Plug - RCJ7Y
• Spark Plug Cap Assembly - 501 48 54 02
• Combination Tool - 506 38 26 01