How to Change the Ignition Module & Check the Gap on a Stihl BG56C Leaf Blower
In this video, we show you how to Change the Ignition Module and Set the Gap on a Stihl BG56C Leaf Blower
Health & Safety Warning - Please ensure that you have safely prepared the machine and workspace. If you are unsure about any aspect of the task please seek professional advice.
Transcript
Today we're going to replace the ignition module and check the gap on a Stihl BG 56 C Leaf blower. Firstly, remove the housing by unscrewing the 3 screws. Now you can access the ignition module. You can now release the spark plug cap. Then remove the two wires. Unscrew the two screws using a torx spanner to release the ignition. Then release the ignition module. You can now replace it with a new ignition module if needed. Before securing, you will need to set the correct gap. This is the distance from the flywheel and ignition module using a setting gauge. Secure with the two screws. Connect the two wires back. Place the spark plug cap back into position. Place the cover back and secure with the 3 screws. That's how you replace the ignition module and check the gap on a Stihl BG 56 C Leaf blower.
Please Note: this gap has a tolerance between 0.15 - 0.3 mm
Parts
Parts and tools included in the Stihl BG56C how-to video.
- Torx Wrench - 4224 890 3400
- Setting Gauge - 1127 890 6400
- Ignition Module - 4241 400 1318
