In this video, we show you how to change the rubber feet on a Stihl TS420 disc cutter.

Health & Safety Warning - Please ensure that you have safely prepared the machine and workspace. If you are unsure about any aspect of the task please seek professional advice.

Transcript

Today we're going to check and change the rubber feet on a Stihl TS420 Disc Cutter. It's a simple task that's often overlooked. First of all use the Torx spanner to remove the screw which secures the rubber feet in place. Once removed, inspect the screw to check that the thread is intact and shows no signs of rust. Also check that the rubber feet haven't worn out and are still useable. Feet that have lost their integrity may cause further damage to the machine and won't support the it properly. Inspect the front handle support for damage, this can be easily removed by unscrewing the bolts located underneath. Locate the rubber foot and begin to screw it into place. Ensure that the foot is secure. That's how you change the rubber feet on a Stihl TS420 Disc Cutter. All the parts & tools needed for this task are listed in the description below.

Parts

Parts and tools included in the TS420 disc cutter how-to video.

• Genuine Rubber Feet - 4205 790 9300
• Non Genuine Rubber Feet - 410 617
• Screw IS-D5x20 - 0000 951 1100
• Base Support for New Type Fuel Tank - 4238 791 7605
• Base Support for Old Type Fuel Tank - 4238 791 7601
• Genuine Torx Wrench/Plug Spanner - 4224 890 3400
• Non Genuine Torx Wrench/Plug Spanner - 410 250