Description
Alcohol Breath Tester - LCD Screen Display
Quick response and resume capacity
Auto power off for saving battery
Key Chain
5 x Mouth Pieces
2 x 1.5v AAA Batteries (Not Included)
Press the "POWER" button once, the sceen will display a 10 or 15 seconds count down indicating the tester has entered into "warm up" mode.
When the "blow" symbol displayed , blow into breath tester for 3-5 seconds, then read the results from the LCD.
The "Caution" symbol will be displayed if the alcohol concentration is between 0.02%-0.05% BAC.
The "Danger" symbol will be displayed if the alcohol concentration is over 0.05% BAC
Specification:
Alcohol test range:0-0.19%BAC (0.0-1.9g/l)
Accuracy: 0.01%BAC (0.1g/l)
Warm up time: 10-15s
Response time: less than 5s
L&S ENGINEERS Ltd does not condone drinking and driving.
L&S ENGINEERS Ltd makes no warranties, expressed or implied, as to the ability of this device to determine whether a person is intoxicated, and we expressly disclaim any liability for incidental, special, or consequential damages of any nature.
Decisions and/or actions based upon the reading of this device shall be at such person’s own risk.
L&S ENGINEERS Ltd assumes no responsibility for consequences of subjects who test negative when using this device and later show that they are under the influence of alcohol or their judgement has been impaired by alcohol.
This device should only be used as a screening device and may only give an indication of the possible presence of alcohol in the blood of the test subject.
Correlation between breath alcohol content and blood alcohol concentration depends on many variables, including temperature and health conditions.
A breath alcohol test is an estimate of your blood alcohol concentration (BAC). The test measures the amount of alcohol in the air that you breathe out (exhale). You can measure your own breath alcohol level with this simple handheld device
A safe or low BAC reading on a breath alcohol screener does not mean that the driver’s reaction times can respond to any emergency encountered.
The exact concentration of alcohol in the blood of the test subject cannot be exactly determined by using a breath alcohol screening device.
To obtain a more accurate result, it is recommended you check repeatedly 2 or 3 times.
Quick response and resume capacity
Auto power off for saving battery
Key Chain
5 x Mouth Pieces
2 x 1.5v AAA Batteries (Not Included)
Press the "POWER" button once, the sceen will display a 10 or 15 seconds count down indicating the tester has entered into "warm up" mode.
When the "blow" symbol displayed , blow into breath tester for 3-5 seconds, then read the results from the LCD.
The "Caution" symbol will be displayed if the alcohol concentration is between 0.02%-0.05% BAC.
The "Danger" symbol will be displayed if the alcohol concentration is over 0.05% BAC
Specification:
Alcohol test range:0-0.19%BAC (0.0-1.9g/l)
Accuracy: 0.01%BAC (0.1g/l)
Warm up time: 10-15s
Response time: less than 5s
L&S ENGINEERS Ltd does not condone drinking and driving.
L&S ENGINEERS Ltd makes no warranties, expressed or implied, as to the ability of this device to determine whether a person is intoxicated, and we expressly disclaim any liability for incidental, special, or consequential damages of any nature.
Decisions and/or actions based upon the reading of this device shall be at such person’s own risk.
L&S ENGINEERS Ltd assumes no responsibility for consequences of subjects who test negative when using this device and later show that they are under the influence of alcohol or their judgement has been impaired by alcohol.
This device should only be used as a screening device and may only give an indication of the possible presence of alcohol in the blood of the test subject.
Correlation between breath alcohol content and blood alcohol concentration depends on many variables, including temperature and health conditions.
A breath alcohol test is an estimate of your blood alcohol concentration (BAC). The test measures the amount of alcohol in the air that you breathe out (exhale). You can measure your own breath alcohol level with this simple handheld device
A safe or low BAC reading on a breath alcohol screener does not mean that the driver’s reaction times can respond to any emergency encountered.
The exact concentration of alcohol in the blood of the test subject cannot be exactly determined by using a breath alcohol screening device.
To obtain a more accurate result, it is recommended you check repeatedly 2 or 3 times.
Product Specifications
L&S Part No. | 200 570 |
---|---|
Unit of Sale | 1 |
Reviews
Add a review
Write Your Own Review
Ask a Question
Customer Questions